Five things to note when using a color sorter

2021-06-10 00:00

        The principle of the color sorter is that it uses photoelectric detection technology to automatically sort out different-colored particles in granular materials based on the differences in the optical properties of the materials.

        As the use of color sorters becomes more and more popular, it is not surprising to encounter color sorter failures, and various color sorter problems emerge in an endless stream. Faced with this dilemma, how should we avoid color sorter failures?

1. Precautions before using the color sorter

(1) The machine should be installed on a level ground without pre-embedded anchor bolts.

(2) The machine should be installed in a separate isolated room (air conditioning is recommended) and should not be installed in low temperature, high temperature, humid or dusty places.

(3) There should be no ground vibration at the installation site.

(4) The machine must be installed at the last finishing process, that is, after polishing or fine grinding.

(5) To prevent strong electromagnetic interference at or near the site, the inlet and outlet pipes and exhaust pipes connected by the user must be made of iron pipes. Plastic pipes and other non-metallic pipes must not be used, and they must be well grounded.

2. Color sorter unpacking and inspection

After receiving the machine, be careful when unpacking to avoid unnecessary damage to the machine parts, and check the integrity of the parts and equipment.

3. Mechanical installation of color sorter

The machine should be installed on a solid platform with railings or on a hard ground (the platform should be at least 1.6 meters above the ground), and should be leveled and adjusted with a level to a level of 2/1000mm or less.